An SMA edge connector may be designed to present a characteristic impedance of 50Ω typically, but that is to the end of the connection pins. Once it’s soldered down, there is a discontinuity ...

It is usually made of metal or plastic and includes one or more assemblies that hold the fiber in place. The ferrule extends ... requiring 0.378 square inches. SMA connectors have a low cost multimode ...

For typical applications, a two-meter length is adequate and therefore, it is Avantes’ standard fiber length. Avantes provides SMA-905 or FC/PC connectors and these can be the different or same on ...

Cable and fiber connections are the best choices for speed and reliability, but which is better? Here's a look at what separates the two technologies. David Anders is a senior writer for CNET ...

Don’t buy a cable modem if you’re on DSL or fiber; those technologies use different standards and connectors. Verizon Fios lets you buy your own modem-router combo, but you have only a single ...

Figuring out which high-speed internet plan to sign up for can be surprisingly daunting when you’re faced with three different types of internet connection: DSL, cable and fiber optic.

Compared to the upload speeds of most cable internet providers, which usually range between 20 to 50Mbps, that’s a vast improvement. You should also know that fiber cables are very expensive ...

We all probably know that for ultimate control and maximum performance, you need assembly language. No matter how good your compiler is, you’ll almost always be able to do better by using your ...

A plug and socket for coaxial cable. RCA connectors are used for analog audio signals (see analog audio). They are also used for digital audio (see S/PDIF) and analog video (see composite video).

Optimum offers three cable internet plans at 300, 500 and 940 Mbps and five fiber internet plans from 300 Mbps to 5 GB. The fiber plans have upload speeds that match the download speeds ...

The first fiber-optic connector to be standardized was SMA, which was followed by the SC, ST and FC types. Since most optical transmissions require two cables (one to transmit and the other to ...

Connector A mechanical device used to align and join two or more fibers together to provide a means for attaching to and decoupling from a transmitter, receiver, or any other fiber optic equipment ...